This panel is used both for the roof and sidewalls, the “R” Panel’s deep ribs create an even-shadowed appearance. The area between the ribs is reinforced.
Gauge: 29, 26, 24 and 22
Lengths: 45′ maximum is standard but longer lengths available by special request.
Fasteners: Standard coated, CAD plated or zinc-aluminum cast head screw
Dimensions: 36″ coverage x 1 1/4″ deep.
Manufactured at: At all plants
Usage: Roof, wall, liner, mansard, and soffit panel applications.
Limitations: 1:12 pitch or greater. Not designed for coverage over bar joist.
|36″ Coverage||Ease of Erection|
|Trimless Ridge||Save time on erection.|
|Manufactured at all plants.||Low freight to any location.|
|Start installation at either end.||Flexible Erection.|
|Economical Profile||Cost Effective.|
|Finish Warranty||20 year life when used with long life fasteners.|
|Diaphragm Action||The panel provides diaphragm capabilities and purlin stability in metal building construction.|
|Wind Uplift Rating||The panel qualifies under several UL90 construction numbers.|
|Skylights||Profile skylights are available for the R Panel.|
|Reverse Rolled Profile||The panel can be reversed rolled putting the paint finish on the under side for erection as an alternate wall panel.|
|Purlin Bearing Leg Option||An extra leg is rolled on one side of lap rib to provide for easier erection.|