Insulated IPP Wall Panel
Attractive flat embossed profile produced in thickness of 2″ to 4″. IPP utilizes a concealed fastener joint that retains the high thermal properties built into all IPS insulated panels. Easy to maintain finishes that add to the appearance of your building. It is designed to module on 36″ centers and has an USDA approved finish as a standard coating.
Gauges: 22, 24 and 26 (22 gauge minimum order required).
Finishes: Both surfaces are stucco embossed, Rockwall Stone-Coated, Dura-20, Royal-K70, IPS Color Chart
Lengths: Max 48′ – 0
Fasteners: Concealed with clips. Concealed fastener installation hardware includes steel clips and screws..
Dimensions: Wide: 36″; Thick: 2″, 2 ?”, 3″, & 4″
Manufactured at: IPS – Stafford, Texas
Usage: Interior partitions and ceilings – Can also be used as an exterior wall panel. Limitations
Butyl side-joint sealant is field installed.
Foam thickness of 2, 2 ?, 3, & 4″ Complete Load/ Span tables available. Excellent test results for air leakage and water penetration through panel joint. Good Surface burning characteristics. Concealed fasteners with clips. Use of symmetrical MESA embossed surfaces on both sides. 48′-0″ maximum length. Instant Interior Partition Offset Lap Joint
Excellent insulating properties providing R values from 13.7 to 27.1 Allows designer to make proper use of panel span capabilities. Confirming weather tightness in compliance with specifications. Complies with model building codes for foam plastics. Provides a contemporary alternative to exposed fasteners. Creates uniformity in finish and color throughout the buildings interior. Allows for continuous uninterrupted partition walls. Energy Efficient Retains high thermal properties.